箭（弹）级间螺栓法兰连接结构准静载失效实验与数值仿真研究

基于火箭(导弹)级间螺栓法兰连接结构,简化设计并制作了一组原理性实验件,设计准静载加载实验测试系统,进行了两次准静载失效实验,并利用ABAQUS软件建立对应的有限元模型。实验中设计了螺栓力响应信号采集传感器,获得了螺栓力响应数据、加载力与加载位移等多组关键数据。根据实验效果和实测数据,分析了连接结构在准静载荷载作用下的失效机理,并对比验证了有限元模型数值模拟效果和精度与实验吻合较好。研究结论可为箭(弹)级间连接结构承载能力和失效实验设计提供参考。     

农村经济结构调整的动力机制分析

农村经济结构调整是一系列因素共同作用的结果 ,引致这种调整的动力机制包括政策导向动力机制、市场需求动力机制、科技发展动力机制和国际竞争动力机制。这四大动力机制共同作用 ,使农村经济结构的调整朝着符合国内外需求、优质高效的目标发展。     

基于Rényi信息增量的机动目标协同跟踪算法

针对基于多传感器组网进行机动目标跟踪的传感器管理问题,提出了一种基于Rényi信息增量的机动目标协同跟踪算法。首先结合"当前"统计模型和交互式多模型不敏卡尔曼滤波算法设计了一种变结构多模型算法,来进行机动目标的状态估计;然后以Rényi信息增量为评价准则,选择使Rényi信息增量最大的单个传感器进行目标跟踪;最后利用得到的最优加速度估计进行网格划分,更新变结构多模型中的模型集合。在一般机动及强机动场景下进行了算法性能分析,仿真结果表明,该算法能够合理地选择传感器,提高了对机动目标的跟踪精度。     

Direct ink writing of 3D-Honeycombed CL-20 structures with low critical size

3D-Honeycombed CL-20 structures with low critical size of detonation have been fabricated successfully for intelligent weapon systems using a micro-flow direct ink writing (DIW) technology. The CL-20-based explosive ink for DIW technology was prepared by a two-component adhesive system with waterborne polyurethane (WPU) and ethyl cellulose (EC). Not only the preparation of the explosive ink but also the principle of DIW process have been investigated systematically. The explosive ink displayed strong shear-thinning behavior that permitted layer-by-layer deposition from a fine nozzle onto a substrate to produce complex shapes. The EC content was varied to alter the pore structure distribution and rheological behavior of ink samples after curing. The deposited explosive composite materials are of a honeycombed structure with high porosity, and the pore size distribution increases with the increase of EC content. No phase change was observed during the preparation process. Both WPU and EC show good compatibility with CL-20 particles. Apparently high activation energy was realized in the CL-20-based composite ink compared with that of the refined CL-20 due to the presence of non-energetic but stable WPU. The detonation performance of the composite materials can be precisely controlled by an adjustment in the content of binders. The 3D honeycombed CL-20 structures, which are fabricated by DIW technology, have a very small critical detonation size of less than 69 μm, as demonstrated by wedge shaped charge test. The ink can be used to create 3D structures with complex geometries not possible with traditional manufacturing techniques, which presents a bright future for the development of intelligent weapon systems.     

新型多相结构MWC宽带数字接收机设计

提出一种基于多相调制宽带转换器结构的新型压缩采样数字接收机,可对宽带中频信号进行截获。新型接收机结构包括:串并转换、并行相乘、多相滤波三个模块。在用相同乘法器资源的条件下,新型接收机结构的整体数据速率远低于现有的调制宽带转换器结构,并且通过仿真验证了其正确性。该新型结构为调制宽带转换器离散压缩采样数字接收机在现场可编程门阵列上的物理实现奠定了基础,使整个接收机结构更具有实际工程应用价值。     

编辑学者化浅论

针对近年来编辑出版界对“编辑学者化”的讨论 ,对“学者化”“化”到什么程度 ,学者化编辑应有什么样的知识结构、能力结构及实现“学者化”要求的主要途径进行了探讨。     

通用装备机液系统综合检测试验平台综合信息管理系统设计与实现

探讨了通用装备机液系统综合检测试验平台综合信息管理系统在网络和功能结构、信息处理流程、数据分类和数据结构、数据传输接口等方面的设计方法,该设计方法在通用装备机液系统综合检测试验平台综合信息管理系统项目中进行了应用,取得了良好效果,为类似的综合管理信息系统的设计探索了一条有效的路径。     

水面舰艇结构抗水下爆炸毁伤能力表征方法研究

基于舰体抗毁伤能力主要表征参数、舰体抗毁伤完好性等级以及标准毁伤设计载荷的研究,提出了三个表征舰体结构抗水下爆炸毁伤能力的参数,给出了表征参数阈值及其与破损船体的毁伤等级之间的关系,形成了舰体结构抗水下爆炸毁伤能力的表征方法,从而为水面舰艇结构抗毁伤能力的评估和工程设计提供参考。     

Military Expenditure as a Proxy for State Power. The Case of France

This paper attempts to build a simple indicator of state power. Military expenditure is the paper’s point of departure, with the definitions given by NATO, SIPRI and others. This definition is discussed and a power version is build, using French budgetary data. Then a defence of the result against traditional or non-traditional critics is presented under an imperative of action. Finally, this concept is enlarged and a new concept of power expenditures is given, one more time using French budgetary data. The conclusion is that this large expenditure concept is an unbiased but imperfect indicator of the will to act, and has to be completed by GDP to indicate the capability to act in the long-run.     

一种攻击机动目标的变结构导引律研究

无人机在快速接敌的过程中,传统比例导引法系数的最优解与目标和载机的距离有关,而且一旦目标机动或增加了干扰,跟踪效果都会变差.为了解决这一问题,提出了一种变结构的跟踪方法.仿真结果表明:该方法在未知目标距离的情况下能够快速接敌,且能减小无人机所需过载,提高制导精度和跟踪鲁棒性,限制了视线角速度.